Αναζήτηση προϊόντων CPR
CONFill®, CONLink®, CONGuard® LSF CPR solutions
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONFill® | LOI | CPR Class indication (Dependent on construction) | Mooney Viscosity ML(1+4)100°C | Density | Shore A | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | ||||
| CONFill® 640 | 40 | Dca-Cca | 27 | 1,87 | 75 | easy processing |
| CONFill® 5355 | 55 | Dca-Cca | 45 | 1,93 | 84 | drumable - suitable for coextrusion |
| CONFill® 5365 | 70 | Dca-B2ca | 45 | 1,91 | 85 | drumable - no sticking with XLPE |
| CONFill® 5375 | 70 | Dca-B2ca | 45 | 1,83 | 77 | drumable - suitable for coextrusion |
| CONFill® 5350 | 100 | Cca-B2ca | 50 | 1,87 | 73 | drumable - suitable for coextrusion |
| CONFill® 100 | Eca | 25 | 1,93 | 85 | high extrusion speed - PVC without softener migration | |
| CONFill® 2550 | Eca | 34 | 1,89 | 88 | XLPE - PVC construction |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONGuard® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONGuard® I 4400 | 32 | 6,0 | 1,46 | 12 / 1740 | 200 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | moderate flame resistance - 90°C continuous service temperature | |
| CONGuard® S 6680 | 32 | Eca | 4,0 | 1,48 | 11 / 1600 | 250 | HM2, CENELEC HD 624.7 S1 BS 6500 | Highly flexible - 70°C continuous service temperature |
| CONGuard® S 6614 SK LDD UV | 35 | Dca -s1,d1,a1 | 9,0 | 1,53 | 11 / 1600 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - 90°C continuous service temperature |
| CONGuard® S 6625 S LDD UV | 36 | Dca -s1,d1,a1 | 6,5 | 1,50 | 12 / 1810 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature |
| CONGuard® S 6610 LDD UV | 37 | Dca -s1,d1,a1 | 10,0 | 1,52 | 11 / 1600 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High speed - low die drool - low shrinkage - 90°C continuous service temperature |
| CONGuard® S 6640 S N | 37 | Cca -s1,d0,a1 | 3,1 | 1,50 | 12 / 1740 | 180 | BS 7629-1, EN 50200 | Very good char forming compound - very good processing characteristic - 90°C continuous service temperature |
| CONGuard® S 6640 S LDD UV | 37 | Cca -s1,d1,a1 | 5,0 | 1,53 | 12 / 1740 | 180 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature |
| CONGuard® I 4750 | 38 | Cca -s1,d1,a1 | 5,0 | 1,56 | 11 / 1600 | 170 | EN 50363-7 TI6/ TI7, EN 50290-2-26 | good electrical values - suitable for single core cables - 90°C continuous service temperature |
| CONGuard S 6690 S | 41 | Cca -s1,d1,a1 | 5,0 | 1,58 | 11 / 1600 | 165 | EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123 | Flexible material - 70°C continuous service temperature |
| CONGuard® S 6545 N | 43 | B2ca -s1,d0,a1 | 4,0 | 1,57 | 11,5/ 1668 | 150 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3 | Very good char forming compound - 90°C continuous service temperature |
| CONGuard® S 8543 LDD UV | 43 | B2ca -s1,d1,a1 | 4,0 | 1,60 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - optimised price-performance ratio - 90°C continuous service temperature |
| CONGuard® I 6541 LDD TB | 45 | Dca -s1,d1,a1 | 7,0 | 1,57 | 12 / 1740 | 170 | EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature |
| CONGuard® S 6650 S LDD UV | 45 | B2ca -s1,d1,a1 | 3,0 | 1,60 | 11 / 1600 | 170 | EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123 | High flame resistance - char forming with good flexibility - 70°C continuous service temperature |
| CONGuard® S 6650 MAA LDD UV NP | 47 | B2ca -s1,d0,a1 | 4,0 | 1,61 | 11 / 1600 | 140 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature |
| CONGuard® S 8850 S LDD UV | 48 | B2ca -s1,d0,a1 | 2,5 | 1,62 | 12,5 / 1810 | 160 | EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3 | Highest flame resistance - very good crack resistance - 90°C continuous service temperature |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
| CONLink® | LOI | CPR Class indication (Dependent on construction) | MfR 150°C; 21,6 kg | Density | Tensile Strength | Elongation | Standards | Comments |
| % [O2] | [g/10 min.] | [g/cm³] | [MPa] / [psi] | [%] | ||||
| CONLink® I 4150 SC | 26 | Cca -s1,d1,a1 | 8,5 | 1,32 | 12,5 / 1810 | 250 | EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Insulation Compound für PV-Cables - very good electrical properties |
| CONLink® S 5150 SC LDD | 32 | Cca -s1,d0,a1 | 5 | 1,50 | 13 / 1886 | 170 | EN 50618 | Sheating Compound for PV-Cables - Weather and UV resistance |
| CONLink® I 4115 SC | 34 | Cca -s1,d0,a1 | 5,5 | 1,50 | 13 / 1886 | 170 | DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5 | Ambient cure cross-linkable fire retardant insulation material |
